Architectural-grade corner molding, milled to your exact length, width and thickness — solid Corian® solid surface, with the edge profile and finish you choose.
Guided steps: length, width, material, thickness and edge profile — with a live drawing at every step.
Your configuration is reviewed and a firm quote comes back within one business day, with drawings for approval.
Made to your exact dimensions and shipped ready to install.
Every length of corner molding is drawn to your exact conditions — length, width, thickness and edge profile — captured as a spec drawing, so what you receive matches your millwork run.
| Material | Solid surface · DuPont Corian® |
|---|---|
| Applications | Outside wall corners, corner protection in corridors, cabinetry and joinery returns |
| Section | Milled to your length, width and thickness |
| Edge profiles | Eased, bevel, bullnose, cove, ogee, Roman ogee |
| Dimensional tolerance | machine accuracy |
| Deliverable | Dimensioned fabrication-ready spec sheet with plan and section |
| Made in | United States |
A couple of measurements define the run. Send a photo with your rough numbers and we’ll confirm the drawing before anything is milled.
Measure the full run the molding needs to cover, corner to corner — lengths from 12 to 144 inches.
Note the width of the face and the thickness of the stock so the milled section matches your detail.
Choose the profile and which side(s) it is machined into — the left edge, the right edge, or both.
Corian® solid surface, milled to order in your chosen length and profile.
Give the finished length, the width of the face and the thickness of the stock. The configurator accepts lengths from 12 to 144 inches to half-inch precision, with a live drawing to confirm the section.
Eased, bevel, radius and cove — machined into the left edge, the right edge, or both, at a treatment depth from 1/4 inch up to 2 inches.
Thickness is offered from 1/2 inch up to 3 inches, so the section can range from a slim trim to a substantial architectural profile.
Every length of molding is milled to your exact dimensions, cut to machine accuracy.
A few guided steps, a live drawing, and a firm quote in one business day.
Custom corner molding — also called an outside corner guard or corner trim — milled to your exact length, width and thickness in Corian® solid surface. Configure it online and receive a dimensioned, fabrication-ready spec sheet, cut to machine accuracy.
An outside corner is the part of a wall that gets hit: by trolleys in a corridor, by furniture in a hallway, by shoulders everywhere. A milled corner guard closes the junction neatly and takes that wear on a replaceable piece instead of the drywall behind it.
The section is milled to your dimensions rather than a stock length trimmed to fit, so the proportions suit the wall rather than whatever the supplier stocked. Milled from solid Corian® billets, long thin sections stay straight because they are cut and finished to size.
Corridors in healthcare, hotels and schools, residential hallways, and joinery returns where a raw corner would otherwise show.
