Architectural-grade Corian® worktops made to your exact dimensions — set the size, the edge profile and the backsplash, and the configurator draws the piece and the fabrication spec sheet as you go. Reception counters, service runs and work surfaces, cut to fit.
Guided steps: length, width, material, thickness and edge profile — with a live drawing at every step.
Your configuration is reviewed and a firm quote comes back within one business day, with drawings for approval.
Made to your exact dimensions and shipped ready to install.
Every countertop is drawn to your exact conditions — length and depth, which edges are treated and how the profile wraps the corners, and the backsplash runs — captured as a spec drawing so what arrives matches your run.
| Material | Solid surface · DuPont Corian® |
|---|---|
| Applications | Kitchen countertop, bathroom worktop, workspace and desk top, reception counter |
| Edge profiles | Eased, bevel, bullnose, cove, ogee, Roman ogee |
| Edge build-up | Laminated build-up from 1-1/2 inch solid stock up to a 4 inch finished edge |
| Sink options | Integrated seamless solid surface bowl, or an undermount cutout to your basin |
| Backsplash | Coved or applied, height and profile to specification |
| Seams | Chemically bonded and sanded flush — inconspicuous on long runs |
| Dimensional tolerance | machine accuracy |
| Deliverable | Dimensioned fabrication-ready spec sheet with plan, profile and cutout detail |
| Made in | United States |
Three measurements cover most runs. Send a photo with your rough numbers and we’ll confirm the drawing before anything is cut.
Measure the run left to right for length and front to back for depth, including any overhang past the cabinet face. Any length to 144″ and any depth to 30″, in half-inch steps.
Note which sides meet a wall. That sets where the backsplash runs go and which edges can take a profile — an edge against a wall is left square.
If the top takes a basin, note the cabinet width and where the trap sits. One, two or three undermount bowls are laid out centred in equal shares of the run.
Corian® solid surface — a non-porous material that never needs sealing, joins invisibly and is repairable, because the color runs through the full thickness. Cut from 12mm sheet with a 2″ build-up behind the front edge for a 1-1/2″ finished edge.
Measure the run for length, the depth front to back, and note which sides meet a wall. Order wall-to-wall and the length is reduced 1/16″ per side so the piece drops in without scribing.
Yes. Six Corian® lavatory bowls, moulded in four colors and matched to the sheet range so a sink can be seamed to a top of the same name. The top is cut to the bowl opening and the flange is bonded beneath the deck, so nothing interrupts the surface.
Eased, bevel, radius, cove, ogee and Roman ogee — machined into the front edge, and you choose which edges carry the treatment and whether it wraps the exposed corners.
No. Backsplash runs are cut from the same sheet, ship loose and are fixed to the wall on site, floating clear of the top with a caulked reveal. Every run is dimensioned separately on the spec sheet.
Every countertop is made to your exact dimensions, cut to machine accuracy.
A few guided steps, a live 3D drawing, and a fabrication-ready spec sheet.
Custom worktops and countertops made to your exact dimensions in solid surface — also called Corian® countertops, seamless countertops or made-to-measure worktops. Configure the piece online and receive a dimensioned, fabrication-ready spec sheet with a plan, an edge profile and a cutout detail, cut to machine accuracy.
One product covers the kitchen countertop, the bathroom worktop, the workspace or desk top and the reception counter. The difference is the dimensions and the sink, not the material or the process.
Choose an eased, bevel, bullnose, cove, ogee or Roman ogee profile, machined into the treated edge. A laminated build-up is bonded behind it so the front reads thicker than the sheet: from 1-1/2 inch solid stock up to a 4-inch finished edge. Treated edges are specified per side, so a run against a wall need not carry a profile it will never show.
Specify an integrated seamless sink — a solid surface bowl bonded and sanded flush so there is no rim and no joint to catch dirt — or an undermount cutout sized to a basin you already have. Formed, coved corner, round corner, scoop and ramping bowls are available in the same material as the top.
A coved backsplash sweeps up from the deck on a radius with no seam at the junction, or an applied backsplash is bonded on with a field seam. Height and profile are set to specification.
Solid surface seams are chemically bonded and sanded flush, so a long run reads as one continuous piece rather than a line of slabs. That is the practical reason it is specified for reception desks and long vanity runs where stone would show every joint.
Unlike laminate, solid surface is the same material all the way through, so a scratch or a burn sands out. Unlike quartz or granite it is non-porous without sealing, it can be thermoformed, and its seams are inconspicuous. It is repairable and renewable in place, which is why it is common in healthcare and commercial washrooms.
Give the finished length and depth, note which edges are exposed and which run to a wall, mark the sink position, and say whether you want a backsplash. Send a photograph with the rough numbers and the drawing is confirmed before anything is cut.
