Architectural-grade solid-surface coved corner sinks made to your exact size — a seamless, non-porous rectangular basin with softly radiused inside corners, so there are no sharp seams to trap water or grime.
Guided steps: length, width, material, thickness and edge profile — with a live drawing at every step.
Your configuration is reviewed and a firm quote comes back within one business day, with drawings for approval.
Made to your exact dimensions and shipped ready to install.
Every coved corner sink is drawn to your exact conditions — length, width, basin depth and drain position — with the coved inside corners captured in a plan and section drawing, so what you receive fits and drains exactly where you need it.
| Material | Solid surface · DuPont Corian® |
|---|---|
| Basin shape | Rectangular with coved (radiused) internal corners |
| Typical use | Healthcare, laboratory, commercial washroom, utility |
| Integration | Bonded to the underside of the deck and sanded flush — seamless, no rim, no joint to catch dirt |
| Surface | Non-porous, repairable and renewable in place, no sealing required |
| Dimensional tolerance | machine accuracy |
| Deliverable | Dimensioned fabrication-ready spec sheet with plan and section |
| Made in | United States |
A few measurements define the basin. Send a photo with your rough numbers and we’ll confirm the drawing before anything is fabricated.
Give the overall length and width of the basin opening, plus the finished basin depth from rim to floor.
Note where the drain sits along the length — centered, or offset left or right.
Measure the sink height so the rim and apron land at the right elevation on your counter or cabinet.
Solid surface — a seamless, non-porous material with no joints or grout lines, made to order in your chosen color and finish.
The inside corners of the basin are softly radiused rather than sharp, so there are no tight seams to trap water or grime — easy to wipe clean and hygienic.
Give the overall length and width, the basin depth, the drain position and the sink height. The configurator accepts your exact dimensions to half-inch precision with a live plan and section drawing.
Kitchens and utility spaces where a seamless, easy-clean basin matters — as well as commercial, healthcare and lab settings that need a non-porous surface.
Every coved corner sink is made to your exact dimensions, cut to machine accuracy.
A few guided steps, a live drawing, and a firm quote in one business day.
A coved corner sink is a rectangular solid surface basin whose internal corners sweep on a radius rather than meeting square. Bonded into the deck and sanded flush, it gives the capacity of a rectangular bowl with nothing for soil to lodge in. Configure it online and receive a dimensioned, fabrication-ready spec sheet with a plan and a section, cut to machine accuracy.
A square internal corner is the hardest part of any basin to clean and the first place a film builds. Sweeping it on a radius means a cloth reaches every part of the bowl. It is the same reasoning behind a coved skirting in a laboratory.
A rectangular bowl holds more usable water than a round one of the same footprint, which matters at a utility or clinical sink where things are rinsed rather than hands washed.
Healthcare, laboratories, commercial washrooms and utility rooms, and any residential project where cleanability is being specified deliberately.
Give the countertop dimensions, the basin position along the run and the drain location. The bowl is drawn into the top as one piece, so the two are specified together rather than bought separately. Send a photograph with the rough numbers and the drawing is confirmed before anything is cut.
