Architectural-grade solid-surface round corner sinks made to your exact size — a seamless, non-porous rectangular basin with generously rounded corners and a shallow scooped floor that guides water to the drain.
Guided steps: length, width, material, thickness and edge profile — with a live drawing at every step.
Your configuration is reviewed and a firm quote comes back within one business day, with drawings for approval.
Made to your exact dimensions and shipped ready to install.
Every round corner sink is drawn to your exact conditions — length, width, basin depth and drain position — with the rounded corners and shallow scooped floor captured in a plan and section drawing, so what you receive fits and drains exactly where you need it.
| Material | Solid surface · DuPont Corian® |
|---|---|
| Basin shape | Rectangular with a generous corner radius |
| Typical use | Vanity, reception washroom, hospitality |
| Integration | Bonded to the underside of the deck and sanded flush — seamless, no rim, no joint to catch dirt |
| Surface | Non-porous, repairable and renewable in place, no sealing required |
| Dimensional tolerance | machine accuracy |
| Deliverable | Dimensioned fabrication-ready spec sheet with plan and section |
| Made in | United States |
A few measurements define the basin. Send a photo with your rough numbers and we’ll confirm the drawing before anything is fabricated.
Give the overall length and width of the basin opening, plus the finished basin depth from rim to floor.
Note where the drain sits along the length — centered, or offset left or right.
Measure the sink height so the rim and apron land at the right elevation on your counter or cabinet.
Solid surface — a seamless, non-porous material with no joints or grout lines, made to order in your chosen color and finish.
Round corner sinks use a fuller corner radius and a shallow scooped floor, while coved corner sinks use a tighter cove radius. Both are seamless and easy to clean — it comes down to the look and basin depth you prefer.
Give the overall length and width, the basin depth, the drain position and the sink height. The configurator accepts your exact dimensions to half-inch precision with a live plan and section drawing.
Kitchens and utility spaces where a seamless, easy-clean basin matters — as well as commercial, healthcare and lab settings that need a non-porous surface.
Every round corner sink is made to your exact dimensions, cut to machine accuracy.
A few guided steps, a live drawing, and a firm quote in one business day.
A round corner sink is a rectangular solid surface basin drawn with a generous corner radius — softer than a coved corner, closer to a rounded rectangle. Bonded into the deck and sanded flush. Configure it online and receive a dimensioned, fabrication-ready spec sheet with a plan and a section, cut to machine accuracy.
A square basin reads technical; a round one reads domestic. The generous radius sits between the two, which is why it suits hospitality and reception washrooms where the fitting should look considered rather than clinical.
Where a coved corner is specified for cleanability, a round corner is specified for how it looks and feels. Both are seamless and non-porous; the difference is the radius and the intent.
Hotel and restaurant washrooms, reception areas, and residential vanities where a soft rectangle suits the joinery better than a circle.
Give the countertop dimensions, the basin position along the run and the drain location. The bowl is drawn into the top as one piece, so the two are specified together rather than bought separately. Send a photograph with the rough numbers and the drawing is confirmed before anything is cut.
