Architectural-grade solid-surface formed sinks made to your exact size — a seamless, non-porous round basin with a smooth spherical bowl and a center drain, so water clears cleanly with nothing to trap grime.
Guided steps: length, width, material, thickness and edge profile — with a live drawing at every step.
Your configuration is reviewed and a firm quote comes back within one business day, with drawings for approval.
Made to your exact dimensions and shipped ready to install.
Every formed sink is drawn to your exact conditions — basin diameter, bowl depth and sink height — with the spherical bowl and center drain captured in a plan and section drawing, so what you receive fits your counter and drains true.
| Material | Solid surface · DuPont Corian® |
|---|---|
| Basin shape | Formed — a soft-sided bowl thermoformed from sheet |
| Typical use | Bathroom vanity, powder room, commercial washroom |
| Integration | Bonded to the underside of the deck and sanded flush — seamless, no rim, no joint to catch dirt |
| Surface | Non-porous, repairable and renewable in place, no sealing required |
| Dimensional tolerance | machine accuracy |
| Deliverable | Dimensioned fabrication-ready spec sheet with plan and section |
| Made in | United States |
A few measurements define the basin. Send a photo with your rough numbers and we’ll confirm the drawing before anything is fabricated.
Give the finished basin diameter — the opening measured across the top of the bowl.
Measure the basin depth from the rim down to the bottom of the spherical bowl.
Measure the sink height so the rim and apron land at the right elevation on your counter or cabinet.
Solid surface — a seamless, non-porous material with no joints or grout lines, made to order in your chosen color and finish.
The basin is formed as a smooth, round bowl — like a section of a sphere — with no sharp corners, so it is easy to clean and water drains cleanly to the center.
Give the basin diameter, the bowl depth and the sink height. The configurator accepts your exact dimensions to half-inch precision with a live plan and section drawing.
Powder rooms, commercial washrooms and healthcare spaces — anywhere a clean, seamless round basin fits, with a non-porous surface that stays easy to keep clean.
Every formed sink is made to your exact dimensions, cut to machine accuracy.
A few guided steps, a live drawing, and a firm quote in one business day.
A formed sink is thermoformed from solid surface sheet and bonded into the deck, so the basin and the countertop are literally one piece. No rim, no clip, no silicone line — nothing to fail and nothing to clean around. Configure it online and receive a dimensioned, fabrication-ready spec sheet with a plan and a section, cut to machine accuracy.
An undermount basin, however well fitted, leaves a joint where the bowl meets the underside of the top. That joint holds sealant, and sealant discolors and eventually lets go. A seamless integrated sink has no such joint: the transition is bonded and sanded, so a cloth runs from the deck into the bowl without catching.
Solid surface can be heated and formed, so the bowl is shaped from sheet rather than machined from a block. That is what keeps the wall thickness even and the radii soft.
Bathroom vanities, powder rooms and commercial washrooms — anywhere the basin is used constantly and cleaned constantly.
Give the countertop dimensions, the basin position along the run and the drain location. The bowl is drawn into the top as one piece, so the two are specified together rather than bought separately. Send a photograph with the rough numbers and the drawing is confirmed before anything is cut.
